An experimental and computational study of tip clearance effects on a transonic turbine stage

This paper describes an experimental and computational investigation into the influence of tip clearance on the blade tip heat load of a high-pressure (HP) turbine stage. Experiments were performed in the Oxford Rotor facility which is a 1½ stage, shroudless, transonic, high pressure turbine. The experiments were conducted at an engine representative Mach number and Reynolds number. Rotating frame instrumentation was used to capture both aerodynamic and heat flux data within the rotor blade row. Two rotor blade tip clearances were tested (1.5% and 1.0% of blade span). The experiments were compared with computational fluid dynamics (CFD) predictions made using a steady Reynolds-averaged Navier–Stokes (RANS) solver. The experiments and computational predictions were in good agreement. The blade tip heat transfer was observed to increase with reduced tip gap in both the CFD and the experiment. The augmentation of tip heat load at smaller clearances was found to be due to the ingestion of high relative total temperature fluid near the casing, generated through casing shear.This work was sponsored by Rolls-Royce plc and the Isle of Man Government.This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.ijheatfluidflow.2015.09.00

Sail optimization for upwind sailing: application in a Tornado, the Olympic class catamaran.

A study of a boat’s motion is carried out in order to analyze the aerodynamic properties of the optimal sail for obtaining the maximum velocity when sailing to windward. The mechanics study shows the optimal CL and CD for a given sail and how the shape of the aerodynamic polar of the sail should be. A parametrical analysis of the aerodynamics of a sail is then carried out varying the maximum camber, position of the maximum camber in the chord direction and position of the maximum camber in the mast direction. The parametric analysis is done numerically with a vortex lattice method (VLM) and experimentally in a wind tunnel. The results show that the influence of the relevant parameters studied can be reduced to the variation of two parameters, A and B, defining the polar of the sail, CD = B + A2CL 2; and the influence of parameters A and B on the maximum VMG obtainable are calculated

Hidden reach of the micromanagers

Small interfering RNAs can trigger unintended, microRNA-like off-target effects, but the impact of these effects on functional studies has been controversial. A recent study in BMC Genomics shows that microRNA-like effects can predominate among the 'hits' of functional genomics screens

Evaluating the Effect of Crutch-using on Trunk Muscle Loads

As a traditional tool of external assistance, crutches play an important role in society. They have a wide range of applications to help either the elderly and disabled to walk or to treat certain illnesses or for post-operative rehabilitation. But there are many different types of crutches, including shoulder crutches and elbow crutches. How to choose has become an issue that deserves to be debated. Because while crutches help people walk, they also have an impact on the body. Inappropriate choice of crutches or long-term misuse can lead to problems such as scoliosis. Previous studies were mainly experimental measurements or the construction of dynamic models to calculate the load on joints with crutches. These studies focus only on the level of the joints, ignoring the role that muscles play in this process. Although some also take into account the degree of muscle activation, there is still a lack of quantitative analysis. The traditional dynamic model can be used to calculate the load on each joint. However, due to the activation of the muscle, this situation only causes part of the load transmitted to the joint, and the work of the chair will compensate the other part of the load. Analysis at the muscle level allows a better understanding of the impact of crutches on the body. By comparing the levels of activation of the trunk muscles, it was found that the use of crutches for walking, especially a single crutch, can cause a large difference in the activation of the back muscles on the left and right sides, and this difference will cause muscle degeneration for a long time, leading to scoliosis. In this article taking scoliosis as an example, by analyzing the muscles around the spine, we can better understand the pathology and can better prevent diseases. The objective of this article is to analyze normal walking compared to walking with one or two crutches using OpenSim software to obtain the degree of activation of different muscles in order to analyze the impact of crutches on the body

Support induced charge transfer effects on electrochemical characteristics of Pt nanoparticle electrocatalysts

The electrokinetic properties of Pt nanoparticles supported on Carbon (Pt/C) and Boron Carbide-Graphite composite (Pt/BC) are compared over a wide potential range. The influence of the support on the electronic state of Pt was investigated via in-situ X-ray Absorption Spectroscopy. Pt d-band filling, determined from XANES white line analysis, was lower and nearly constant between 0.4 and 0.95V vs. RHE for Pt/BC, indicating more positively charged particles in the double layer region and a delay in the onset of oxide formation by about 0.2V compared to the Pt/C catalyst, which showed a marked increase in d-band vacancies above 0.8V vs. RHE. Moreover, δμ analysis of the XANES data indicated a lack of sub-surface oxygen for the Pt/BC catalyst compared to the Pt/C catalyst above 0.9V vs. RHE. Additional anion adsorption on the Pt/BC in the double layer region, detected by CO displacement, was also confirmed by XANES analysis of the d-band occupancy. The H 2 oxidation activities of electrodes with low catalyst loadings were assessed under high mass transport conditions using the floating electrode methodology. The metal-support interaction between the Pt and BC support improved the maximum hydrogen oxidation current density by 1.4 times when compared to Pt/C

Systematic review and consensus definitions for the Standardised Endpoints in Perioperative Medicine initiative: patient-centred outcomes

BACKGROUND: Patient-centred outcomes are increasingly used in perioperative clinical trials. The Standardised Endpoints in Perioperative Medicine (StEP) initiative aims to define which measures should be used in future research to facilitate comparison between studies and to enable robust evidence synthesis. METHODS: A systematic review was conducted to create a longlist of patient satisfaction, health-related quality of life, functional status, patient well-being, and life-impact measures for consideration. A three-stage Delphi consensus process involving 89 international experts was then conducted in order to refine this list into a set of recommendations. RESULTS: The literature review yielded six patient-satisfaction measures, seven generic health-related quality-of-life measures, eight patient well-being measures, five functional-status measures, and five life-impact measures for consideration. The Delphi response rates were 92%, 87%, and 100% for Rounds 1, 2, and 3, respectively. Three additional measures were added during the Delphi process as a result of contributions from the StEP group members. Firm recommendations have been made about one health-related quality-of-life measure (EuroQol 5 Dimension, five-level version with visual analogue scale), one functional-status measure (WHO Disability Assessment Schedule version 2.0, 12-question version), and one life-impact measure (days alive and out of hospital at 30 days after surgery). Recommendations with caveats have been made about the Bauer patient-satisfaction measure and two life-impact measures (days alive and out of hospital at 1 yr after surgery, and discharge destination). CONCLUSIONS: Several patient-centred outcome measures have been recommended for use in future perioperative studies. We suggest that every clinical study should consider using at least one patient-centred outcome within a suite of endpoints

The stealth episome: suppression of gene expression on the excised genomic island PPHGI-1 from Pseudomonas syringae pv. phaseolicola

Pseudomonas syringae pv. phaseolicola is the causative agent of halo blight in the common bean, Phaseolus vulgaris. P. syringae pv. phaseolicola race 4 strain 1302A contains the avirulence gene avrPphB (syn. hopAR1), which resides on PPHGI-1, a 106 kb genomic island. Loss of PPHGI-1 from P. syringae pv. phaseolicola 1302A following exposure to the hypersensitive resistance response (HR) leads to the evolution of strains with altered virulence. Here we have used fluorescent protein reporter systems to gain insight into the mobility of PPHGI-1. Confocal imaging of dual-labelled P. syringae pv. phaseolicola 1302A strain, F532 (dsRFP in chromosome and eGFP in PPHGI-1), revealed loss of PPHGI-1::eGFP encoded fluorescence during plant infection and when grown in vitro on extracted leaf apoplastic fluids. Fluorescence-activated cell sorting (FACS) of fluorescent and non-fluorescent PPHGI-1::eGFP F532 populations showed that cells lost fluorescence not only when the GI was deleted, but also when it had excised and was present as a circular episome. In addition to reduced expression of eGFP, quantitative PCR on sub-populations separated by FACS showed that transcription of other genes on PPHGI-1 (avrPphB and xerC) was also greatly reduced in F532 cells harbouring the excised PPHGI-1::eGFP episome. Our results show how virulence determinants located on mobile pathogenicity islands may be hidden from detection by host surveillance systems through the suppression of gene expression in the episomal state

Annotation of two large contiguous regions from the Haemonchus contortus genome using RNA-seq and comparative analysis with Caenorhabditis elegans

The genomes of numerous parasitic nematodes are currently being sequenced, but their complexity and size, together with high levels of intra-specific sequence variation and a lack of reference genomes, makes their assembly and annotation a challenging task. Haemonchus contortus is an economically significant parasite of livestock that is widely used for basic research as well as for vaccine development and drug discovery. It is one of many medically and economically important parasites within the strongylid nematode group. This group of parasites has the closest phylogenetic relationship with the model organism Caenorhabditis elegans, making comparative analysis a potentially powerful tool for genome annotation and functional studies. To investigate this hypothesis, we sequenced two contiguous fragments from the H. contortus genome and undertook detailed annotation and comparative analysis with C. elegans. The adult H. contortus transcriptome was sequenced using an Illumina platform and RNA-seq was used to annotate a 409 kb overlapping BAC tiling path relating to the X chromosome and a 181 kb BAC insert relating to chromosome I. In total, 40 genes and 12 putative transposable elements were identified. 97.5% of the annotated genes had detectable homologues in C. elegans of which 60% had putative orthologues, significantly higher than previous analyses based on EST analysis. Gene density appears to be less in H. contortus than in C. elegans, with annotated H. contortus genes being an average of two-to-three times larger than their putative C. elegans orthologues due to a greater intron number and size. Synteny appears high but gene order is generally poorly conserved, although areas of conserved microsynteny are apparent. C. elegans operons appear to be partially conserved in H. contortus. Our findings suggest that a combination of RNA-seq and comparative analysis with C. elegans is a powerful approach for the annotation and analysis of strongylid nematode genomes

Playing with networks : How economists explain

Peer reviewe

Which patients with heart failure should receive specialist palliative care?

AIMS: We investigated which patients with heart failure (HF) should receive specialist palliative care (SPC) by first creating a definition of need for SPC in patients hospitalised with HF using patient-reported outcome measures (PROMs) and then testing this definition using the outcome of days alive and out of hospital (DAOH). We also evaluated which baseline variables predicted need for SPC and whether those with this need received SPC. METHODS AND RESULTS: PROMs assessing quality of life (QoL), symptoms, and mood were administered at baseline and every 4 months. SPC need was defined as persistently severe impairment of any PROM without improvement (or severe impairment immediately preceding death). We then tested whether need for SPC, so defined, was reflected in DAOH, a measure which combines length of stay, days of hospital re-admission, and days lost due to death. Of 272 patients recruited, 74 (27%) met the definition of SPC needs. These patients lived one third fewer DAOH than those without SPC need (and less than a quarter of QoL-adjusted DAOH). A Kansas City Cardiomyopathy Questionnaire (KCCQ) summary score of <29 identified patients who subsequently had SPC needs (area under receiver operating characteristic curve 0.78). Twenty-four per cent of patients with SPC needs actually received SPC (n = 18). CONCLUSIONS: A quarter of patients hospitalised with HF had a need for SPC and were identified by a low KCCQ score on admission. Those with SPC need spent many fewer DAOH and their DAOH were of significantly worse quality. Very few patients with SPC needs accessed SPC services